Tag Archives: slider

OnePlus 10T removes the Alert Slider

The OnePlus 10T is right around the corner, but it seems the phone will be quite a shift for the company. This weekend, OnePlus has confirmed that after almost a decade, the OnePlus 10T will be the brand’s first flagship phone without the Alert Slider.

From the original OnePlus One, the brand’s smartphones have almost always included a slider on the side of the device which was used to switch between ringer modes. Called the “Alert Slider,” this switch could move between vibrate, mute, and full volume modes, much like the iPhone’s mute switch.

The feature has since lived on through each OnePlus flagship, but removed on some more affordable devices such as the OnePlus Nord N20.

Now, the OnePlus 10T is also saying goodbye to the Alert Slider, as OnePlus confirmed to The Verge.

The reveal came alongside a first look at the design of the OnePlus 10T, which has a light green color alongside a black option, and looks largely the same as the OnePlus 10 Pro released earlier this year.

Why did OnePlus ditch the Alert Slider on the OnePlus 10T? OnePlus chief designer Hope Liu explains that the move was “necessary” for other key components of the device, including a bigger battery, even faster charging, and a better antenna. The Alert Slider takes up around 30 mm² on the motherboard, which has a “relatively large impact” on building the device. The alternative to removing the Alert Slider on the OnePlus 10T would have been stacking the motherboard, making the phone thicker.

Rumor has it the OnePlus 10T will have 150W fast charging, up from 80W on the OnePlus 10 Pro – North American models were limited to just 65W. Liu also confirmed that the OnePlus 10T has “two charging pumps.”

Another reason we’ll speculate might have something to do with the removal would be durability. As our Max Weinbach was quick to recall, a stress test of the OnePlus 10 Pro earlier this year revealed that the phone would snap in half when bent, a test that the vast majority of other devices generally pass. It could just be a coincidence, but the 10 Pro snapped right where the Alert Slider resided.

The other key change visible is that the Hasselblad branding that’s been prominent on the past couple of OnePlus flagships is nowhere to be seen.

Apparently, the Hasselblad partnership went by the wayside because OnePlus “wanted to offer an ultimate performance flagship smartphone at the device’s chosen price point,” but the brand also confirmed that it will still use a 50MP Sony IMX766 as its primary sensor, technically a slight upgrade from the 10 Pro.

Further, the OnePlus 10T has a new antenna arrangement with 15 separate antennas inside of the phone. Apparently, the new layout works better when the phone is being held horizontally, which is being pitched as an improvement for mobile gaming. On that note, this interview also confirmed a 6.7-inch display, which comes as no surprise.

OnePlus has confirmed an August 3 launch for the OnePlus 10T.

More on OnePlus:

FTC: We use income earning auto affiliate links. More.


Check out 9to5Google on YouTube for more news:

Read original article here

ULA Launches Asymmetrical ‘Super Slider’ Atlas 5 Rocket

The Atlas V 511 rocket at Space Launch Complex-41 at Cape Canaveral Space Force Station in Florida.
Photo: ULA

On Friday afternoon, United Launch Alliance will attempt to launch a uniquely fitted Atlas 5 rocket from Cape Canaveral Space Force Station in Florida. You can watch the action live right here.

The window for today’s launch will open at 2:00 p.m. EST (11:00 a.m. PST), with forecasters predicting an 80% chance of good weather at Cape Canaveral.

The ULA Atlas V 511 rocket, with its extra-wide faring and lone side rocket booster, will blast off from Space Launch Complex-41. United Launch Alliance will use this unique configuration to launch two satellites for the U.S. Space Force, in a mission known as USSF-8. You can stream ULA’s webcast here, with coverage starting at 1:30 p.m. EST (10:30 a.m. PST):

The two identical satellites, GSSAP-5 and GSSAP-6, represent the fifth and six satellites of Space Force’s Situational Awareness Program. The satellites will go directly to geosynchronous orbit, some 22,300 miles (36,000 km) above the equator, where they will provide “neighborhood watch services” for the purpose of “improving flight safety for all spacefaring nations operating in that orbit,” according to ULA’s mission overview. Data from the GSSAP satellite network will allow for improved orbital predictions, such that satellite controllers can be alerted to possible collisions with space junk or other satellites. The previous four GSSAP satellites were delivered in pairs on Delta 4 rockets in 2014 and 2016.

A view of the rocket with its lone solid-fueled booster.
Photo: ULA

ULA says this’ll be the first and only flight of the Atlas V 511 configuration, and it remains the only unflown configuration in the Atlas family of rockets. Since 2002, the Atlas V has flown in 10 different configurations, this being the 11th. Today’s launch will be ULA’s third direct-to-GEO mission, the previous two being AFSPC-11 in 2018 and STP-3 in 2021.

The “511” configuration is in reference to the fairing, side booster, and second stage booster. The “5” represents the width of the payload fairing, which is 5 meters, or 17 feet, across. The first “1” is the number of solid rocket boosters strapped to the side, and the second “1” refers to the number of engines on the second stage Centaur booster. ULA has previously flown an Atlas V 411 rocket, a configuration you should be able to figure out for yourself given my clear and concise explanation.

The single solid-fueled booster gives the rocket a distinctly asymmetrical appearance, but it will provide the additional power needed at liftoff: 371,500 pounds of thrust. The kerosene-fueled main booster will provide 860,200 pounds of thrust, for a total of 1.23 million pounds of thrust at liftoff. The Atlas V 511 is capable of delivering up to 11,570 pounds (5,250 kg) of payload to an elliptical geostationary orbit, according to SpaceFlightNow.

The Atlas V 511, in addition to looking off-kilter, will also exert asymmetrical thrust, as AmericaSpace explains in a post from last year:

Like its smaller cousin, the Atlas V 411—which carries a slightly smaller payload fairing, measuring 13 feet (4 meters) across, and which saw service most recently in February 2020 to launch Solar Orbiter—the 511 will exhibit an unusual “sideways-flying” perspective as it “slides” upward from the pad.

Steering actuators on the Atlas V’s RD-180 engine will counteract the asymmetrical thrust from the single solid and ensure that the rocket flies straight and true, but it will undoubtedly offer a disconcerting sight for spectators. And as [ULA CEO Tory] Bruno previously noted, all Atlas Vs have their own nicknames. With the 411 already dubbed “Slider”, the moniker for the bigger 511 is “Super Slider”.

The entire mission will take slightly less than eight minutes to complete. Key moments will include the jettisoning of the solid rocket booster at two minutes, the jettisoning of the payload fairing at the 3:30 mark, separation of Atlas/Centaur at 4:27, and the first main engine start of Centaur 10 seconds later. The two satellites will separate at marks 6:35 and 6:45. Fingers are crossed that the Super Slider will perform as expected.

More: Elon Musk’s Starlink Is Causing More Streaks to Appear in Space Images

Read original article here

Google Camera color temperature slider arrives on Pixel 6

The revamped camera hardware on the Pixel 6 series delivers better overall shots that are stunning on their own and seem to catch up with the iPhone 13 in big ways, but it doesn’t come down just to hardware. Alongside new motion features, the Pixel 6 also adds a color temperature slider to the Google Camera app.

Available on the Pixel 6 and Pixel 6 Pro, this new color temperature slider in the Google Camera app works alongside the contrast and brightness sliders on the other side of the interface. The slider, as you might expect, adjusts the color temperature of the scene to make it warmer or cooler to suit the shot you need.

The effect can be rather dramatic at its highest levels, but it can help in adjusting the temperature in scenes that need it. As mentioned in our review, this is a feature I didn’t find necessary over the time I’ve had with the phone so far, but I’d imagine it might come in handy in harshly lit scenes such as parties where specialized colored lighting is in use.

Notably, too, the codename for this feature is called “chameleon.” At this point in time, we’re not 100% sure if Google plans to bring this to other Pixel phones, as it may be tied to the new Tensor chip.

Pixel 6 is shipping now from the Google Store and other major retailers.

More on Pixel 6:

FTC: We use income earning auto affiliate links. More.


Check out 9to5Google on YouTube for more news:

Read original article here